Pulley Lagging
Belt Cleaner
Impact Bed And Bar
Skirting Rubber
Conveyor Belt
Conveyor Idler
Belt Repair Material
Wear Lining
DCCD® Light duty belt primary belt cleaner installed on the positive position of the conveyor pulley, the main purpose is to remove most of the residual material attached to the surface of the belt.
DCCD® primary belt cleaner is mainly used to clean the belt with a belt width of 500 ~1600 mm.
The blades of primary belt cleaner is made of polyurethane material, the polyurethane (pu) has good performance of wear resistant, corrosion resistant, anti-hydrolysis, belt friendly, no sticky material and long service life.
1. The welding area is smooth and has no bubbles and bumps, the bearing capacity is stronger.
2. The polyurethane cleaner blade has no bubbles on surface, enhancing wear resistance.
3. The applicable temperature is -45 ℃~60 ℃.
4. Has aluminum core cleaner blade and fixing slot cleaner blade for choice.
5. Using high strength carbon steel - 35 # steel
6. Can choose integral cleaner blade, achieve faster replacement
Blade hardness (Shore A ) | 90 |
Tensile strength | 31 MPA |
Elongation at break | 410 % |
Abrasion | 30 / mm2 |
Density | 1.11 g/cm3 |
Model No. | Belt Width | Width of blade | AOL(G) | Pulley Dia. | L1 | L2 |
DCCD500S-1 | 500 | 400 | 1200 | 500 630 800 1000 1250 1400 1600 500 630 800 1000 1250 1400 1600 | 326 338 356 376 400 416 436 336 348 366 386 410 426 446 | 195 258 342 441 563 636 735 189 252 336 335 557 630 729 |
DCCD650S-1 | 650 | 600 | 1300 | |||
DCCD800S-1 | 800 | 800 | 1500 | |||
DCCD1000S-1 | 1000 | 1000 | 1700 | |||
DCCD1200S-1 | 1200 | 1200 | 1900 | |||
DCCD1400S-1 | 1400 | 1400 | 2100 | |||
DCCD1600S-1 | 1600 | 1600 | 2300 | |||
DCCD1800S-1 | 1800 | 1800 | 2500 | |||
DCCD2000S-1 | 2000 | 2000 | 2700 | |||
DCCD2200S-1 | 2200 | 2200 | 2900 |
Service item:
DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.
The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.
Clients should provide necessary assistance during the services.
Service Mode:
Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.
Field support: onsite install and guide service is available according to clients requirement
Working Procedure:
For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.
Give solutions by telephone
The solution was obtained by experiment, then notify the clients.
