Conveyor belt quick repair solution
Conveyor is stopped because conveyor belt are torn by Horizontal and vertical tearing during running. It can be quickly repaired with CRJ-rubber-100 rubber device, which is normally connected with the repair connecting strip process, and can maintain …
-
- Coal Mine Steel Cord Conveyor Belt Joint Splicing
-
What is the most important for belt splicing of conveyor belt underground coal mining?It is the safety. If so the rubber formula and installation process of the conveyor belt joint splicing is particularly important.
- Learn more
-
- Conveyor belt installation in Laos
-
The 1200m ST2500 conveyor belt arrived in Laos and was installed.DCCD engineers made improvements to the workshop to facilitate the installation of new conveyor belts and the remove of old conveyor belts.
- Learn more
-
- Reduce coal conveyor inspection and maintenance time
-
Our thermal power plant customers have proposed new demand: Hoping an important coal conveyor line minimizes downtime of the inspection and maintenance, ensuring conveyor a long operating time.
- Learn more
-
- DCCD1996 Conveyor Belt Quick Repair Glue Upgrade
-
In response to the need for faster repair speed on siteAiming at the impact of the blanking point on the surface of the conveyor beltFor the tension of the conveyor belt after tearingAfter 13 months, DCCD R&D engineers developed a new generation o…
- Learn more
-
- Quick Repair of Conveyor Belt of Coal Conveying Line
-
The customers coal conveying line has only four hours of downtime. DCCD technicians cleaned the surface of the conveyor belt wounds in 20 minutes, applied DCCD1996 quick repair glue, and dried the surface in 4 minutes. After 1 hour, the conveyor was t…
- Learn more
-
- DCCD®1996 quick repair glue applied in coal conveying line
-
The conveyor line has been shut down for 2 hours, and the damaged conveyor belt needs to be quickly repaired.
- Learn more
-
- DTQS conveyor belt is installed on the port conveyor line
-
The original old conveyor belt in the port has a service life of 2 years. The DTQS engineer inspected the working conditions and found that the cause of the conveyor belt’s rapid damage was the damage to the conveyor belt caused by the bulk material …
- Learn more
-
- DTQS® performs conveyor belt splicing joints on mine conveyor lines
-
DTQS performs on-site hot vulcanization joint work on ST1600 conveyor belts with a beltwidth of 1400.Use DTQS special joint rubber for steel wire conveyor belt with the same rubber formula as conveyor belt
- Learn more
-
- DCCD®1996 Conveyor Belt Quick Repair Glue Applied to Conveyor in Thermal Power Plant
-
The 200-meter conveyor belt working face was scratched in the coal conveying line of the thermal power plant. The on-site staff used DCCD1996 conveyor belt quick repair glue to repair the conveyor belt.
- Learn more
-
- DCCD®1996 Conveyor Belt Quick Repair Glue Applied to Coal Conveying Line
-
When DCCD technicians provided rapid maintenance of the conveyor belt for the coal conveying line of coal enterprises, it was found that the reason for the damage of the conveyor belt was that the guide trough was installed with an unqualified skirtin…
- Learn more
-
- Replacement of conveyor belts and splicing joint for large inclination conveyor lines
-
For large inclination conveyor lines, there are higher requirements for the tensile strength of the conveyor belt. We choose a more reliable and safe hot vulcanization splicing joint solution.
- Learn more
-
- DCCD® supplies conveyor belt joint material to Italy
-
Italian customers initially used German brand hot vulcanized joint materials. After testing, this ST2500 conveyor belt joint adopts DCCD intermediate rubber,cover rubber and corresponding accessories.
- Learn more
-
- Conveyor Belt Repair Strip Fast Shipping
-
DCCD Xinjiang region agents urgently need a batch of conveyor belt repair strips, they must solve the conveyor belt scratches for cement factory customers within 48 hours to get the order.
- Learn more
