Pulley Lagging
Belt Cleaner
Impact Bed And Bar
Skirting Rubber
Conveyor Belt
Conveyor Idler
Belt Repair Material
Wear Lining
Conveyor Dust Control System
CHAT NOW Mail: hxrubber@cnhxxj.cn
Nylon is one of the best quality synthetic fibers that rubber industry use nowadays. The nylon canvas is woven by nylon fibers both in warp and in weft, it is the most widely used fabric in rubber industry, and its outstanding merits are high abrasion resistance, high tensile strength and good fatigue resistance.
Conveyor belt with nylon canvas inside have the characteristics of thin belt body, high tensile strength, good shock resistance, good trough ability, high adhesion between piles, splendid, flexibility and long working life. Nylon conveyor belt are suitable for medium, long distance and heavy-load transportation of materials.
| Cover Grade | Tensile Strength ≧ | Elongation ≧ | Abrasion ≧ | Change rate of tensile strength and elongation after aging | |
| Mpa | Kgf / cm2 | % | Mm3 | % | |
| H | 24 | 240 | 450 | 120 | - 25 ~ + 25 |
| D | 18 | 180 | 400 | 100 | - 25 ~ + 25 |
| L | 15 | 150 | 350 | 200 | - 30 ~ + 30 |
Fabric Type | Fabric Structure | Fabric Spec. | Ply Thickness (mm/P) | Strength Series. N/mm | Cover Thickness. mm | Width. Mm | Length. m | ||||||
Horizontal | Weft | 2 Ply | 3 Ply | 4 Ply | 5 Ply | 6 Ply | Top | Bottom | |||||
Nylon (NN) | Nylon (N) | Nylon (N) | NN100 | 0.7 | 200 | 300 | 400 | 500 | 600 | 1.5-8.0 | 0 - 4.5 | 400-2500 | < 300 |
NN125 | 0.75 | 250 | 375 | 500 | 625 | 750 | |||||||
NN150 | 0.8 | 300 | 450 | 600 | 750 | 900 | |||||||
NN200 | 0.9 | 400 | 600 | 800 | 1000 | 1200 | 500-2500 | ||||||
NN250 | 1.1 | 500 | 750 | 1000 | 1250 | 1500 | |||||||
NN300 | 1.25 | - | 900 | 1200 | 1500 | 1800 | |||||||
NN350 | 1.35 | - | 1050 | 1400 | 1750 | 2100 | 800-2500 | ||||||
NN400 | 1.7 | - | - | 1600 | 2000 | 2400 | |||||||
NN500 | 1.8 | - | - | 2000 | 2500 | 3000 | |||||||
Service item:
DCCD ®/ HONGXIN® RUBBER provides complete technical support to ensure the products installed in time and run safety.
The main purpose of technical support is to solve the products or technical problems which are beyond to the clients.
Clients should provide necessary assistance during the services.
Service Mode:
Communications support: the engineers help to solve the problems by various means of communication, main including phone answer, video or graphic by email.
Field support: onsite install and guide service is available according to clients requirement
Working Procedure:
For clients requirements, we will react quickly with 24 hours, no more than 48 hours at the latest.
Give solutions by telephone
The solution was obtained by experiment, then notify the clients.
